Coriolis Mass Flowmeter comes with Integrated designed structure, reliable performance & accurate measurement. Suitable for measuring mass flow rate without any influence of pressure, temperature and velocity of flow. Display mass flow, volume flow, accumulated flow & density for more precise measurement. With multiple designs of flowmeter tube structure and a wide range of flow-rate, it can meet the demand…
The RF3300-B Battery-Powered Electromagnetic Flowmeter is the ultimate solution for precise volumetric flow measurement in locations where access to a mains power supply is unavailable or too costly to install. Operating on Faraday’s Law of Electromagnetic Induction, this advanced mag meter delivers continuous, high-accuracy readings for raw water, municipal water distribution, irrigation systems, and remote wastewater pipelines. Engineered for maximum autonomy and…
Rocksensor’s Electromagnetic Flowmeters are the workhorse of the water, wastewater, and heavy processing industries. Operating on Faraday’s Law of Electromagnetic Induction, these flowmeters provide highly accurate volumetric flow measurements for any conductive liquid—including raw water, chemical slurries, sewage, and abrasive mining pastes. Featuring a completely smooth, unobstructed flow tube, the electromagnetic flowmeter introduces zero pressure drop into your piping system and is…
Electromagnetic Flowmeters being non intrusive type, can be used in general for all kinds of liquids which have a reasonable conductivity as low as 20μS/cm. The obstruction to the flow is almost nil and therefore can be used for measuring media with suspended particles including sewage water too. These meters are suitable for most acids, bases, chemicals & aqueous solutions…
Slurry Type Electromagnetic Flowmeter is specially designed for slurry applications. These meters are suitable for a variety of slurries as we offer customised lining & electrode material based upon process requirement. The fluids like sand-water slurry, coal-powder slurry, sewage, wood pulp, chemicals, iron ore slurries, water other than distilled water in large pipe lines, hot fluids, high viscous fluids specially…
Vortex Flowmeter widely used for Volumetric flow measurement of gases, steam and liquid applications. Integrated with pressure & temperature compensation, it is ideal for measuring Flow of saturated and supersaturated steam in large facilities & to improve steam production efficiency. It comes with 4 piezo-electric crystal encapsulated inside the sensor to achieve required efficiency. Available with multiple process connections &…
Turbine Flowmeter is widely used for volumetric flow measurement of clean and low viscous liquid applications. Its simple and firm structure helps in easy installation. It is suitable in applications for wide measuring range and low flow velocity conditions. Additionally, they offer cost-effective operation, low maintenance requirements, minimal pressure drop, and compatibility with various output signals, making them an ideal…
A variable area flowmeter, commonly known as a rotameter, measures the flow rate of liquids and gases by utilizing a float that rises and falls within a tapered tube as the flow rate changes. Its simplicity, reliability, and ease of use, making it an ideal choice for applications requiring straightforward and visual flow monitoring without the need for external power…
Thermal mass flow meters, also known as thermal dispersion or immersible mass flow meters comprises of a family of instruments for the measurement of the total mass flow rate of a fluid, primarily gases, flowing through closed conduits. Thermal gas mass flow meter is designed on the basis of thermal dispersion, and adopts method of constant differential temperature to measure…
Positive Displacement Flowmeters (Oval Gear) are used for the continuous and intermittent measurement of liquid, which are typical of Volumetric type, covering large flowranges, low pressure loss, large viscosity range, easy installation, high accuracy & easy calibration. This type oval gear flow meters is mainly used to measure fuel oil, gasoline, marine heavy oil, diesel, lube oil, molasses, sauces, resin,…
The Radar Level Flowmeter utilizes advanced radar technology to deliver precise measurement of water level and flow velocity. Its compact and robust design ensures easy installation and reliable performance, even in harsh outdoor and extreme weather conditions. Engineered for open-channel flow monitoring, it is ideally suited for applications such as rivers, canals, dams, and irrigation systems.
The RLS7200 Microwave Barrier Switch is a level switch featuring an emitting unit and a receiving unit installed face-to-face. The emitting unit sends a continuous, low-power microwave beam to the receiving unit. When a medium is present between the units, the signal is dampened, and this change is detected by the built-in electronics module, which then converts it into a…
The RLT6400P with plastic horn antenna is a radar sensor for continuous level measurement of aggressive liquids in small vessels and under simple process conditions. It’s an economic solution. The very good signal focusing ensures the use in vessels with many installations such as stirrers and heating spirals.
The RLT8100 is a radar sensor for continuous level measure-ment of non-aggressive liquids. The sensor delivers precise and reliable measured values even in applications with steam, buildup, foam generation or condensation. It is a truly cost-effective level and interface sensor for your measuring task.
The RLT8200 is a radar sensor for contact continuous level measurement of bulk solid. It is particularly suitable for level measurement in vessels under complex process conditions.
The RLT8300 is a radar sensor for contact continuous level measurement of strong aggressive liquid. It is particularly suitable for level measurement in vessels under complex process conditions.
The RLT8600 is a radar sensor for contact continuous level measurement of strong aggressive liquid. It is particularly suitable for level measurement in vessels under complex process conditions.
3D Radar Level Scanner is based on single-point radar terahertz frequency modulation continuous wave technology. Using motors to drive the radar sensor to rotate in multiple dimensions. The rotation position & angles of target can be obtained. The level & volume measurement information is obtained through the cloud server then forms a visual 3D image.
The Smart Differential Pressure Transmitter model with Remote mount connections comes with additional features to meet various process requirements. It is designed for a variety of applications with stainless steel capillary between Remotely mount transmitter & diaphragm seal. The Transmitter can further be customised to meet different process connections & applications with varied conditions. With Rocksensor’s patented technology of Ultra-High…
This Smart type Differential model with Direct mount connections comes with ease in mounting to meet various kinds application requirements. It is designed for application involving high temperature even upto 260 °C. The Transmitter can further be customised to meet different process connections & applications with varied conditions.
A Smart Differential Pressure Transmitter is suitable for almost all type of media and suitable to measure DP across a varied span. The transmitter comes with micro-structured Silicon diaphragm which is most commonly used in industrial pressure measurement. The diaphragm consists of a thin layer chosen suitably as per media or application requirement. The material of this film can be…
A Smart Gauge Pressure Transmitter is suitable for a variety of media to measure pressure above or below atmospheric pressure with reference to atmospheric pressure. The devices comes with pressure sensing range upto 60MPa. The transmitter comes with micro-structured Silicon diaphragm which is most commonly used in industrial pressure measurement. The diaphragm consists of a thin layer chosen suitably as…
The Smart type Gauge/ Absolute Pressure Transmitter with Direct mount connections comes with ease in mounting to meet various kinds application requirements. It is designed for application involving high temperature even upto 350° C. The Transmitter can further be customised to meet different process connections & applications with varied conditions.
This Smart Gauge/ Absolute Pressure Transmitter model with Remote mount connections comes with additional features to meet various process requirements. It is designed for a variety of applications with stainless steel capillary between Remotely mount transmitter & diaphragm seal. The Transmitter can further be customised to meet different process connections & applications with varied conditions. With Rocksensor’s patented technology of…
A Smart Absolute Pressure Transmitter is suitable for almost all types of liquid & gaseous media, it measures pressure lesser than atmospheric pressure. The smart absolute pressure transmitter has a built-in low pressure reference, so it is helpful in measuring absolute pressure as close as to 1 mmHg absolute. The transmitter comes with micro-structured Silicon diaphragm which is most commonly…
Low cost differential pressure transducer adopts diffusion silicon differential pressure sensor and stainless steel case, the two pressure interfaces can be connected on the measured pipeline or impulse line, suitable for measuring differential pressure of gas and liquid. A wide range of process connection and electrical connection options are available to meet almost requirement.
It is widely used into temperature measurement of liquid, gas or steam at nodes such as pipelines and tanks in sanitary industries such as food and pharmaceuticals.
It is widely used into temperature measurement of liquid, gas or steam at nodes such as pipelines and tanks in sanitary industries such as food and pharmaceuticals.
RTH5501 is high quality wall type temperature and humidity sensor, adopting Switzerland advanced sensor module and high performance single chip designed for temperature humidity measurement indoor room, widely used in agriculture: greenhouse, mushroom house, farm, seeding room, poultry house; refrigerated storage, Warehouse, cold room Medicinal, HAVC; Building Automation high humidity environment application.
RTH5502 is a Duct type super high temperature and gas corrosion-proof temperature and humidity transmitter, adopting the Switzerland advanced sensor and latest integrated measurement technology, through the high performance single chip designed for temperature humidity measurement for high temperature or corrosion environment in Building automation, HVAC, Greenhouse, Pharmaceutical and Chemical industries etc.
The Field Mount temperature transmitter processes the on-site thermal resistance or thermocouple signal through isolation and amplification, converts it into a DC signal linear with temperature and outputs it to the control system. The parameters can be modified with the supporting host computer software, and can be used with unit combination instruments and DCS, PLC.
Ultrasonic level transmitter is mounted on the top of the tank and transmits an ultrasonic pulse down into the tank.The transmitter measures the time delay between the transmitted and received echo signal and the on-board microprocessor calculates the distance to the liquid surface using the formula.
